{"product_id":"microlife-mic-bpb3-basic-bloeddrukmonitor-1-stuks","title":"Microlife MIC BPB3 Basic Blood Pressure Monitor 1 Piece","description":"\u003cb\u003eMicrolife MIC BPB3 Basic blood pressure monitor\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eMicrolife MIC BPB3 Basic blood pressure monitor\u003cbr\u003eOperating conditions: 10 - 40 °C \/ 50 - 104 °F\r\u003cbr\u003e15-90 % maximum relative humidity\r\u003cbr\u003eWeight: 277 g (including batteries)\r\u003cbr\u003eDimensions: 131 x 90 x 60.5 mm\r\u003cbr\u003eCuff dimensions: from 17 - 52 cm\r\u003cbr\u003eMeasurement procedure: oscillometric, according to Korotkoff\r\u003cbr\u003emethod: Phase I systolic Phase V diastolic\r\u003cbr\u003eMeasurement range: SYS: 60 - 255 mmHg\r\u003cbr\u003eDIA: 40 - 200mmHg\r\u003cbr\u003ePulse: 40 - 199 beats per minute\r\u003cbr\u003eCuff pressure display range: 0 - 299 mmHg\r\u003cbr\u003eResolution: 1 mmHg\r\u003cbr\u003eStatic accuracy: within ± 3 mmHg\r\u003cbr\u003ePulse accuracy: ±5 % of the displayed value\r\u003cbr\u003ePower source: 4 x 1.5V alkaline batteries; type AA\r\u003cbr\u003eAC adapter DC 6V, 600 mA (optional)\r\u003cbr\u003eBattery life: approximately 920 measurements (with new\r\u003cbr\u003ebatteries)\r\u003cbr\u003eIP Class: IP 20\r\u003cbr\u003eReference to standards:\r\u003cbr\u003eIEC 80601-2-30; IEC 60601-1;\r\u003cbr\u003eIEC 60601-1-2 (EMC); IEC 60601-1-11\r\u003cbr\u003e\r\u003cbr\u003eExpected lifespan:\r\u003cbr\u003eDevice: 5 years or 10000 measurements, whichever comes first.\r\u003cbr\u003eAccessories: 2 years or 5000 measurements, whichever comes first\r\u003cbr\u003e\r\u003cbr\u003eThis device complies with the standards of the Medical Devices Directive 93\/42\/EEC.\r\u003cbr\u003eTechnical changes reserved.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWhat this product is used for\u003c\/b\u003e\u003cbr\u003eMeasuring blood pressure.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eInstructions for use\u003c\/b\u003e\u003cbr\u003eInserting the batteries\r\u003cbr\u003eAfter unpacking the device, first insert the batteries.\r\u003cbr\u003eThe battery compartment 7 is located at the bottom of\r\u003cbr\u003ethe device. Insert the batteries (4 x 1.5 V, size AA), paying attention to\r\u003cbr\u003eon the indicated polarity.\r\u003cbr\u003e\r\u003cbr\u003eSetting the date and time\r\u003cbr\u003eAfter the batteries are installed, the year will blink on the screen. You can set the year by pressing the M button 3. To confirm and then set the month, press the time button 4.\r\u003cbr\u003eYou can now set the month with the M button. Press the time button to confirm and then set the day.\r\u003cbr\u003eFollow the instructions above to set the day, hour, and minutes.\r\u003cbr\u003e4. Once you have set the minutes and press the time button, the date and time are set and the time will be displayed.\r\u003cbr\u003e5. If you want to change the date and time, press and hold the time button for about 3 seconds until the year starts blinking. You can now enter new values as described above.\r\u003cbr\u003e\r\u003cbr\u003eSelect the correct cuff\r\u003cbr\u003eMicrolife has cuffs in different sizes. Select the cuff size that corresponds to the circumference of your upper arm (the measured circumference around the middle of the upper arm).\r\u003cbr\u003eContact your Microlife importer if the included cuff 8 does not fit.\r\u003cbr\u003eAttach the cuff to the device using the cuff connector 9 push the connector 5 as far as possible into the device.\r\u003cbr\u003e\r\u003cbr\u003eCuff size for upper arm circumference\r\u003cbr\u003eS 17 - 22 cm\r\u003cbr\u003eM 22 - 32 cm\r\u003cbr\u003eM - L 22 - 42 cm\r\u003cbr\u003eL 32 - 42 cm\r\u003cbr\u003eL - XL 32 - 52 cm\r\u003cbr\u003e\r\u003cbr\u003ePre-formed cuffs are optionally available.\r\u003cbr\u003eUse only Microlife cuffs!\r\u003cbr\u003e\r\u003cbr\u003eStep-by-step guide for a reliable blood pressure measurement\r\u003cbr\u003eAvoid activity, eating, or smoking just before a measurement.\r\u003cbr\u003eSit on a chair with back support and relax for 5 minutes.\r\u003cbr\u003eKeep your feet together on the ground and do not cross your legs.\r\u003cbr\u003eAlways measure on the same arm (usually the left). It is recommended that doctors measure both arms during a patient's first visit to determine which arm to measure. Measurement should be taken on the arm with the higher blood pressure.\r\u003cbr\u003eRemove clothing that covers the upper arm, sleeves should not be rolled up to avoid constriction.\r\u003cbr\u003eAlways ensure that the correct cuff size is used (arm circumference marking is indicated on the cuff).\r\u003cbr\u003eAttach the cuff to the arm, but not too tightly.\r\u003cbr\u003eMake sure the cuff is placed 1-2 cm above your elbow.\r\u003cbr\u003eThe artery mark on the cuff (approximately 3 cm long bar) should be placed over the vein of the arm (inside).\r\u003cbr\u003eSupport your arm so that it is relaxed.\r\u003cbr\u003eEnsure that the cuff is at the same height as your heart\r\u003cbr\u003e\r\u003cbr\u003eMeasuring blood pressure\r\u003cbr\u003e1. Press the ON\/OFF button to start the measurement.\r\u003cbr\u003e2. The cuff is now automatically inflated. Relax,\r\u003cbr\u003edo not move and do not tense your arm muscles until the measurement result is displayed. Breathe normally and do not talk.\r\u003cbr\u003e3. If the cuff is correctly placed, the Cuff Check indicator symbol will appear on the screen. When the symbol\r\u003cbr\u003eCuff position check appears on the screen, the cuff\r\u003cbr\u003ecorrectly positioned but a proper blood pressure measurement can still be performed.\r\u003cbr\u003e4. When the correct pressure is reached, pumping stops and the pressure slowly decreases. If the desired pressure is not reached, the device will automatically pump more air into the cuff.\r\u003cbr\u003e5. During the measurement, the heart rate symbol blinks on the screen.\r\u003cbr\u003e6. The result, including the systolic BP and diastolic BP and the heart rate, will be displayed.\r\u003cbr\u003eAlso refer to this manual for explanations of the other displays.\r\u003cbr\u003e7. Once the measurement is complete, remove the cuff.\r\u003cbr\u003e8. Turn off the device. (The monitor will automatically turn off after about 1 min.).\r\u003cbr\u003eYou can stop the measurement at any time by pressing the ON\/OFF button or opening the cuff (e.g. if you feel uncomfortable or notice an unpleasant pressure).\r\u003cbr\u003eThis meter has been specially tested for use during pregnancy and pre-eclampsia. If you record unusually high measurements, you should repeat the measurement after some time (e.g., 1 hour). If the measurement is still too high, consult your doctor or gynecologist. \r\u003cbr\u003e\r\u003cbr\u003eManually setting the inflation\r\u003cbr\u003eIn the case of high systolic blood pressure (e.g., above 135 mmHg), it may be beneficial to set the pressure manually. Press the ON\/OFF button when the blood pressure monitor is inflated to about 30 mmHg. Hold the button until the pressure is about 40 mmHg higher than the expected systolic value and then release the button.\r\u003cbr\u003e\r\u003cbr\u003ePerforming a measurement without saving it\r\u003cbr\u003eOnce the measurement is completed and the result is displayed, press and hold the ON\/OFF button 1 until \"M\" AP appears on the display. Then press the time button 4 and the measurement will be deleted and not saved.\r\u003cbr\u003eWhen the measurement is successful, \"CL\" appears on the display\r\u003cbr\u003e\r\u003cbr\u003eHow do I measure my blood pressure?\r\u003cbr\u003eThe triangular symbol, on the left of the display AO, applies to the classification of home-measured blood pressure values in adults in accordance with international guidelines (ESH, ESC,\r\u003cbr\u003eJSH). The blood pressure value: Optimal (white), elevated (shaded gray) or too high (black). Values in mmHg.\r\u003cbr\u003e\r\u003cbr\u003eRange                   Systolic    Diastolic Advice\r\u003cbr\u003e1. high blood pressure       \u0026gt;\/= 135       \u0026gt;\/= 85 Seek medical advice\r\u003cbr\u003e2. elevated blood pressure   130 - 134     80 - 84 Self-monitoring\r\u003cbr\u003e3. normal blood pressure    \u0026lt;130          \u0026lt;80 Self-monitoring\r\u003cbr\u003e\r\u003cbr\u003eThe evaluation of the values is in accordance with the table. For example:\r\u003cbr\u003ea blood pressure value of 140\/80 mmHg or a value\r\u003cbr\u003eof 130\/90 mmHg shows \"blood pressure too high.\"\r\u003cbr\u003e\r\u003cbr\u003eAppearance of the irregular heartbeat (IHB) symbol\r\u003cbr\u003eThis symbol BT indicates that there is an irregular heartbeat\r\u003cbr\u003edetected. In this case, the measured blood pressure may differ from\r\u003cbr\u003eyour actual blood pressure values. It is recommended to\r\u003cbr\u003emeasurement to be repeated.\r\u003cbr\u003e\r\u003cbr\u003eInformation for the doctor in case of repeated\r\u003cbr\u003edisplays the IHB symbol\r\u003cbr\u003eThis device is an oscillometric blood pressure monitor that also\r\u003cbr\u003ewrist measures during blood pressure measurement and indicates when the heartbeat is irregular\r\u003cbr\u003e\r\u003cbr\u003eMemory storage\r\u003cbr\u003eThis device stores the last 30 measurement values.\r\u003cbr\u003e\r\u003cbr\u003eViewing the stored values\r\u003cbr\u003ePress the M button 3 when the device is turned off. The display will first show «M» AP and «A», which stands for the average of all stored values.\r\u003cbr\u003ePressing the M button again shows the previous value. By pressing the M button again, you can scroll through the measurement results.\r\u003cbr\u003e\r\u003cbr\u003eDelete all values\r\u003cbr\u003eIf you are sure you want to permanently delete all stored values, press and hold the M button (first turn off the device) until «CL ALL» appears, then release the button. To permanently erase the memory, press the time button while «CL ALL» is blinking. Individual measurements cannot be deleted.\r\u003cbr\u003e\r\u003cbr\u003eCancel removal: press the ON\/OFF button 1 while «CL ALL» is blinking.\r\u003cbr\u003e\r\u003cbr\u003eBattery indicator and battery replacement\r\u003cbr\u003eBatteries nearly empty\r\u003cbr\u003eWhen the batteries are about ¾ used, the battery symbol will blink as soon as the device is turned on\r\u003cbr\u003e(partially charged battery is displayed). Although the\r\u003cbr\u003edevice will continue to measure reliably, you need to replace the batteries\r\u003cbr\u003ewill be replaced soon.\r\u003cbr\u003eBatteries low – replacement\r\u003cbr\u003eWhen the batteries are empty, the battery symbol AN will blink as soon as the device is turned on (empty battery displayed). You cannot continue measuring and must replace the batteries.\r\u003cbr\u003e1. Open the battery compartment 7 at the back of the device.\r\u003cbr\u003e2. Replace the batteries – check the correct polarity as\r\u003cbr\u003eshown by the symbols in the compartment.\r\u003cbr\u003e3. To set the date and time, follow the procedure as\r\u003cbr\u003edescribed in Section \"First use of the device\".\r\u003cbr\u003e\r\u003cbr\u003eWhich batteries and what procedure?\r\u003cbr\u003eUse 4 new, long-life 1.5V, type AA alkaline batteries.\r\u003cbr\u003eDo not use batteries past their expiration date\r\u003cbr\u003ehas passed.\r\u003cbr\u003eRemove the batteries if the device will not be used for an extended\r\u003cbr\u003enot used for a long time\r\u003cbr\u003e\r\u003cbr\u003eUse of rechargeable batteries\r\u003cbr\u003eYou can also use rechargeable batteries for this device\r\u003cbr\u003ePlease use only type \"NiMH\" rechargeable batteries!\r\u003cbr\u003eThe batteries must be removed and charged if\r\u003cbr\u003ethe battery symbol (battery empty) appears! They should not\r\u003cbr\u003eremain in the device, as they may get damaged\r\u003cbr\u003e(complete discharge due to minimal use\r\u003cbr\u003eof the device, even when it is turned off).\r\u003cbr\u003eAlways remove the rechargeable batteries if you do not intend\r\u003cbr\u003eyou plan to use the device for a week or longer!\r\u003cbr\u003eThe batteries CANNOT be charged in the blood pressure monitor! Charge these batteries in an external\r\u003cbr\u003echarger and adhere to the information regarding the\r\u003cbr\u003echarging, maintenance, and durability!\r\u003cbr\u003e\r\u003cbr\u003eUse of a power adapter\r\u003cbr\u003eYou can use this device with the Microlife power adapter (DC 6V, 600 mA)\r\u003cbr\u003eto use.\r\u003cbr\u003eOnly use the original available Microlife\r\u003cbr\u003epower adapter for your supply voltage.\r\u003cbr\u003eCheck that both the power adapter and the cable are not\r\u003cbr\u003ebe damaged\r\u003cbr\u003e1. Insert the adapter cable into the power adapter connection 6 of the\r\u003cbr\u003eblood pressure monitor.\r\u003cbr\u003e2. Plug the power adapter plug into the wall socket.\r\u003cbr\u003eWhen the power adapter is connected, no battery power is used.\r\u003cbr\u003e\r\u003cbr\u003eFor explanations of error messages on the device, refer to the leaflet\/manual.\r\u003cbr\u003e\r\u003cbr\u003eSafety, maintenance, accuracy testing, and disposal\r\u003cbr\u003eFollow the instructions for correct use. This documentation provides you with important operating and safety instructions regarding this device. Read the documentation carefully before using the device and keep it for future reference.\r\u003cbr\u003eThis device may only be used for the purpose described in the user manual. The manufacturer cannot be held liable for damage caused by improper use.\r\u003cbr\u003eThis device contains sensitive components and must be handled with caution. Follow the storage and operating instructions as described in the chapter \r\u003cbr\u003e\r\u003cbr\u003e“Technical specifications”!\r\u003cbr\u003eThe cuff is delicate and must be handled with care.\r\u003cbr\u003eOnly inflate the cuff when it is applied to the arm.\r\u003cbr\u003eDo not use the device if you suspect it is damaged or if you notice anything unusual during use.\r\u003cbr\u003eNever open the device.\r\u003cbr\u003eRead the further safety instructions in the separate sections of this booklet\r\u003cbr\u003eThe measured results with this device do not provide a diagnosis.\r\u003cbr\u003eIt does not replace a consultation with a doctor, especially not when\r\u003cbr\u003esymptoms do not match. Do not rely solely on the\r\u003cbr\u003emeasurement result, always consider the other symptoms as well as the feedback\r\u003cbr\u003e\r\u003cbr\u003eAllow children to use the device only under adult supervision. Small parts may be swallowed. Be alert to the risk of entanglement if the device is equipped with cables or hoses.\r\u003cbr\u003e\r\u003cbr\u003eDevice maintenance\r\u003cbr\u003eClean the device only with a soft dry cloth.\r\u003cbr\u003eClean the cuff\r\u003cbr\u003eThe cuff included with the device is washable.\r\u003cbr\u003e1. Remove cuff connector 9 from the cuff hose AT\r\u003cbr\u003eand gently pull the balloon through the opening.\r\u003cbr\u003eDo not wash the cuff cover warmer than 30 °C.\r\u003cbr\u003eDry the cuff with a dry cloth.\r\u003cbr\u003e4. Insert the balloon back into the cuff cover through the opening and gently press the balloon flat.\r\u003cbr\u003e5. Reattach the cuff connector to the cuff hose\u003cbr\u003e\u003cbr\u003e\u003cb\u003eContraindications\u003c\/b\u003e\u003cbr\u003eDo not use this device if the patient's condition meets the following contraindications, to avoid inaccurate measurements or injuries.\r\u003cbr\u003eThe device is not intended for measuring blood pressure in pediatric patients under 12 years of age (children, infants, or newborns).\r\u003cbr\u003eThe presence of significant arrhythmias during the measurement can disrupt the blood pressure measurement and affect the reliability of the blood pressure readings. Consult your doctor to determine if the device is suitable for use in this case.\r\u003cbr\u003eThe device measures blood pressure using a pressure cuff. If the limbs being measured have injuries (for example, open wounds) or are under conditions or treatments (for example, intravenous infusion) that make them unsuitable for contact with the surface or pressure application, do not use the device to prevent worsening of the injuries or conditions.\r\u003cbr\u003ePatient movements during the measurement can disrupt the measurement process and affect the results.\r\u003cbr\u003eAvoid measuring patients with conditions, diseases, and patients who are susceptible to environmental conditions that lead to uncontrollable movements (for example, shaking or trembling) and patients who cannot communicate clearly (for example, children and unconscious patients).\r\u003cbr\u003eThe device uses an oscillometric method to determine blood pressure. The arm being measured must have normal perfusion. The device is not intended for use on a limb with restricted or disturbed blood circulation. If you have circulation or blood disorders, consult your doctor before using the device.\r\u003cbr\u003eAvoid measurements on the arm on the side of a breast amputation or lymph node removal.\r\u003cbr\u003eDo not use this device in a moving vehicle (for example, in a car or airplane).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eComponents\u003c\/b\u003e\u003cbr\u003eBlood pressure monitor with cuff\u003cbr\u003e\u003cbr\u003e\u003cb\u003eWarnings\u003c\/b\u003e\u003cbr\u003eIndicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.\r\u003cbr\u003e\r\u003cbr\u003eThis device is intended for the specific use described in this user manual. The manufacturer cannot be held liable for damage caused by incorrect use.\r\u003cbr\u003e\r\u003cbr\u003eDo not change the patient's medication and treatment based on the result of one or more measurements. Changes in treatment and medication may only be\r\u003cbr\u003eprescribed by a medical professional.\r\u003cbr\u003eInspect the device, the cuff, and other parts for damage. DO NOT USE the device, cuff, or parts if they appear damaged or are functioning abnormally.\r\u003cbr\u003eProlonged interruption of blood flow reduces peripheral circulation and may cause tissue damage. Watch for signs (e.g., tissue discoloration) of impaired peripheral circulation if you are performing continuous or prolonged measurements.\r\u003cbr\u003eProlonged exposure to cuff pressure will reduce peripheral perfusion and may lead to injury. Avoid situations of extended cuff pressure that exceed normal measurements.\r\u003cbr\u003eIn the event of abnormally prolonged pressure application, stop the measurement or loosen the cuff to reduce the pressure in the cuff.\r\u003cbr\u003eDo not use this device in an oxygen-rich environment or near flammable gas.\r\u003cbr\u003eThe device is not water-resistant or waterproof. Do not spill on the device and do not immerse it in water or other liquids.\r\u003cbr\u003eDo not disassemble the device, accessories, and parts, and do not attempt to repair it during use or storage.\r\u003cbr\u003eAccess to the internal hardware and software of the device is prohibited. Unauthorized access to and maintenance of the device during use or storage may compromise the safety and performance of the device.\r\u003cbr\u003eKeep the device away from children and individuals who cannot operate the device. Be aware of the risks of accidentally swallowing small parts and strangulation with the cables and hoses of this device and accessories.\r\u003cbr\u003e\r\u003cbr\u003eIndicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury to the user or patient, or damage to the device or other materials.\r\u003cbr\u003eThe device is intended only for measuring blood pressure on the upper arm. Do not measure at other locations, as the measurement will not accurately reflect your blood pressure.\r\u003cbr\u003eAfter a measurement is completed, loosen the cuff and rest for \u003e 5 minutes to restore limb perfusion before taking a new measurement.\r\u003cbr\u003eDo not use this device simultaneously with other medical electrical (ME) equipment. This may cause malfunctions in the device or inaccuracies in the measurements.\r\u003cbr\u003eDo not use this device near high-frequency (HF) surgical equipment, magnetic resonance imaging (MRI) equipment, and computed tomography (CT) scanners.\r\u003cbr\u003eThis may cause malfunctions in the device and inaccuracies in the measurements.\r\u003cbr\u003eUse and store the device, cuff, and parts under the temperature and humidity conditions specified in the «Technical specifications». Use and storage of the device, cuff, and parts in conditions that fall outside the range specified in the «Technical\r\u003cbr\u003especifications» is mentioned, may lead to defects in the device and the safety of use.\r\u003cbr\u003eProtect the device and accessories from the following to prevent damage to the device:\r\u003cbr\u003ewater, other liquids, and moisture\r\u003cbr\u003eextreme temperatures\r\u003cbr\u003eimpact and vibrations\r\u003cbr\u003e- direct sunlight\r\u003cbr\u003e- contamination and dust\r\u003cbr\u003e- Stop using this device and the cuff and consult your doctor if you experience skin irritation or discomfort\r\u003cbr\u003e\r\u003cbr\u003eInformation on electromagnetic compatibility\r\u003cbr\u003eThis device complies with EN60601-1-2: 2015 Electromagnetic\r\u003cbr\u003estandard electromagnetic interference.\r\u003cbr\u003e\r\u003cbr\u003eThis device is not certified for use near\r\u003cbr\u003ehigh-frequency (HF) medical equipment.\r\u003cbr\u003eDo not use this device near strong electromagnetic fields and portable radio frequency communication devices (such as microwaves and mobile devices). Keep away from\r\u003cbr\u003euse of this device a minimum distance of 0.3 m to\r\u003cbr\u003esuch devices.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStorage advice\u003c\/b\u003e\u003cbr\u003eStorage conditions: -20 - +55 °C \/ -4 - +131 °F\r\u003cbr\u003e15-90 % maximum relative humidity\u003cbr\u003e\u003cbr\u003e\u003cb\u003eAdditional information\u003c\/b\u003e\u003cbr\u003eMedical device. Read the instructions for use before use.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eManufacturer \/ Distributor\u003c\/b\u003e\u003cbr\u003eMicrolife Corp., \n9F, 431, Ruiguang Road, NeiHu, \nTaipei 11492, Taiwan, China","brand":"Microlife","offers":[{"title":"1 Piece","offer_id":56958291837273,"sku":"118244","price":58.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0888\/2343\/1513\/files\/4719003342821_A1N1.png?v=1776020293","url":"https:\/\/www.biolovers.nl\/en\/products\/microlife-mic-bpb3-basic-bloeddrukmonitor-1-stuks","provider":"Biolovers","version":"1.0","type":"link"}