Aosept Plus hydraglyde

Aosept Plus hydraglyde

AOSEPT PLUS contact lens care system with HydraGlyde* Moisture Matrix for cleaning, disinfecting, neutralizing, removing proteins, and storing all types of contact lenses, including silicone hydrogel lenses.
-

What this product is used for
AOSEPT PLUS contact lens care system with HydraGlyde* Moisture Matrix for cleaning, disinfecting, neutralizing, removing proteins, and storing all types of contact lenses, including silicone hydrogel lenses.
The AOSEPT PLUS system consists of: the AOSEPT PLUS cleaning and disinfecting solution with HydraGlyde Moisture Matrix (see image 1) and the AOSEPT PLUS lens cup (see image 2). The AOSEPT PLUS lens cup consists of a transparent cup and a continuous unit with a screw cap, lens holders (baskets), and the AODISC^ neutralizing catalyst attached to the bottom. Ensure that the AODISC is attached before use as this is essential for the neutralization of hydrogen peroxide. AOSEPT PLUS solution and the AOSEPT PLUS lens cup must always be used together.

Instructions for use
1. Wash your hands and dry them with a clean towel.
2. Open the lens holder marked with "L" and place your left lens on the dome. Close the lens holder; ensure that the lens does not get stuck.
3. Repeat this procedure with your right lens; place it on the dome of the other lens holder marked with "R".
4. Open the closure cap of the AOSEPT PLUS bottle and bend it back and out of the way.
5. Rinse the lenses thoroughly in the lens holders with AOSEPT PLUS for 5 seconds (see image 3).
6. Fill the cup with AOSEPT PLUS solution up to the marking line. NOT TOO MUCH OR TOO LITTLE SOLUTION (see image 4).
7. Place the lens holder in the AOSEPT PLUS cup and screw the lid on tightly. Do not shake the cup.
8. Store the lens cup upright (see image 5).
- If bubbles appear from the opening at the top of the lens cup, there may still be non-neutralized AOSEPT PLUS solution present. Dispose of the solution from the lens cup and clean up any spilled residue from the surface where the AOSEPT PLUS lens cup has been. Rinse the AOSEPT PLUS cup and lens holder thoroughly with sterile saline solution. If you have spilled, clean it up immediately with a paper towel. Wash your hands thoroughly before touching your lenses or your eyes.
REPEAT THE ABOVE DISINFECTION PROCEDURE.
9. Allow the lenses to remain submerged for at least 6 hours (see image 6) or overnight to neutralize the solution.
10. Remove your lenses from the lens holder.
11. Your lenses are now ready for use.
12. Dispose of the used solution, rinse the AOSEPT PLUS cup and lens holder with sterile saline solution – DO NOT USE TAP WATER OR NON-STERILE WATER.
13. Allow both to air dry by turning the lens holder next to the cup upside down (see image 7).

14. If you do not plan to insert the lenses immediately after disinfection/neutralization, you can store them in the neutralized AOSEPT PLUS solution, in the unopened AOSEPT PLUS lens cup for up to 14 days. After this period, you must clean and disinfect your lenses with AOSEPT PLUS before wearing them.

If recommended by your contact lens specialist:
- Rinse the lenses before inserting them with a sterile saline solution

Contraindications
- Do not use if you are allergic to any of the ingredients.
- Never use AOSEPT PLUS for heat disinfection.

Ingredients
The preservative-free, watery AOSEPT PLUS solution with HydraGlyde Moisture Matrix contains: Hydrogen peroxide 3% Phosphonic acid (stabilizer) Sodium chloride Phosphate (buffer system) Poloxamer (surface cleaner) HydraGlyde Moisture Matrix (EOBO-21* - polyoxyethylene-polyoxybutylene). polyoxyethyleen-polyoxybutyleen)

Warnings
Never Attempt To Clean Or Rinse The Lenses In Your Hands With Aosept Plus Solution. A Slight, Temporary Discoloration Of The Skin (Becoming Lighter) May Occur After Contact With The Non-Neutralized Solution.
• Never Attempt To Clean The Lenses With A Separate Cleaning Solution, As Any Residue Will Cause The Solution In The Lens Cup To Foam And Overflow From The Lens Cup.
• Meaning Of The Red Closure Cap: Never Bring Non-Neutralized Aosept Plus Solution Directly Into The Eye.
• Only Use The Enclosed Aosept Plus Lens Cup. Do Not Use Any Other Lens Cup.
• Ensure That Your Lenses Are Submerged For At Least 6 Hours In The Provided Lens Cup (Neutralization Process) Before Inserting Them. Non-Neutralized Aosept Plus Solution Is An Extremely Effective Disinfectant That Will Cause A Burning Sensation If It Comes Into Contact With The Eye. If You Accidentally Insert A Non-Neutralized Lens Into The Eye, Remove It Immediately And Rinse The Open Eye Thoroughly With Sterile Water Or Saline Solution. Disinfect The Lens Again Before Inserting It.
• Always Use Fresh Aosept Plus Solution - Never Reuse The Solution In The Lens Cup As Its Effectiveness Will Be Compromised.
• Never Transfer Aosept Plus Into Another Bottle.
• Never Dilute Or Mix Aosept Plus With Any Solution As This Will Nullify Its Effect.
• Never Allow Contact Lenses To Come Into Contact With Non-Sterile Liquids, (Including Tap Water And Saliva) As Microbial Contamination May Occur, Which Can Lead To Permanent Eye Damage.
• Keep Out Of Reach Of Children.
• If Non-Neutralized Aosept^ Plus Solution Is Swallowed, Immediately Drink Large Amounts Of Water And Consult Your Doctor.
• Consult Your Doctor Or Contact Lens Specialist Before Taking Any Medication
Use in combination with contact lenses

Side effects
In case of persistent discomfort or irritation, remove your lenses, discontinue use of the product, and consult your contact lens specialist.

Storage advice
- Do not use after the expiration date.
- Once the bottle is opened, any remaining solution should be discarded after 3 months.
- Store below 25°C.
- Always use AOSEPT^ PLUS solution between 15°C and 25°C as neutralization below 15°C may take longer than 6 hours.
- Do not place in direct sunlight.

Additional information
- Do not use after the expiration date.
- Check the seal before first use. If already broken: do not use.
- Close the bottle cap after use.
- Once the bottle is opened, any remaining solution should be discarded after 3 months.
- Ensure that the tip of the bottle never touches any surface, as this can contaminate the solution.
- Always use the new AOSEPT^ PLUS lens cup that is provided with each bottle of AOSEPT PLUS solution.
- Store below 25°C.
- Always use AOSEPT^ PLUS solution between 15°C and 25°C as neutralization below 15°C may take longer than 6 hours.
- Do not place in direct sunlight.
- Consult your contact lens specialist before changing fluids.
Medical device. Read the instructions for use before use.

Manufacturer / Distributor
Alcon Nederland B.V., Avelingen-West. 5, 4202 MS Gorinchem