Bausch & Lomb Biotrue multi purpose

Bausch & Lomb Biotrue multi purpose

Bausch & Lomb Biotrue multi purpose
-

What this product is used for
Daily use of Biotrue® multi-purpose solution cleans and removes accumulations of fat, protein, and other deposits and dirt from soft contact lenses.
Destroys harmful microorganisms on the lens. Biotrue® multi-purpose solution helps prevent the buildup of deposits on the lens surface.
It kills harmful microorganisms on the lens.
While storing the lenses, the contact lens solution envelops the lens with a moist layer, allowing the lens to be worn comfortably throughout the day.
Biotrue® multi-purpose solution can also be used to rinse lenses.

Instructions for use
Follow these 3 simple steps to care for, clean, disinfect, and remove protein from your lenses daily.
This daily contact lens care is recommended by Bausch + Lomb for the healthy and comfortable wearing of contact lenses:
Step 1:
Apply 3 drops of Biotrue® multi-purpose solution to each side of the lens and gently rub each side for 20 seconds.
Step 2:
Rinse each side of the lens for 5 seconds with Biotrue® multi-purpose solution.
Step 3:
Place the cleaned contact lens in the lens case and fill it with fresh Biotrue® multi-purpose solution.
Let the lenses sit in the solution for at least 4 hours.
Make sure to always use fresh lens solution.
Your contact lenses are now ready for use.
If there is still dirt on the contact lenses, rinse them with Biotrue® multi-purpose solution before inserting the lenses.
Always follow the advice of your contact lens specialist.
Based on the composition of your tear fluid and wearing schedule, your contact lens specialist may recommend additional products or
recommend procedures.
If you do not insert your contact lenses immediately, store them in a closed lens case.
Do not store your lenses in a saline solution instead of in the Biotrue® multi-purpose solution.
A saline solution has no disinfecting effect.
You can store your lenses for a maximum of 30 days in a closed lens case.
If you want to store your lenses for a longer period, you must clean and disinfect them again with fresh Biotrue® multi-purpose solution before use.

Contraindications
Do not use if you are sensitive to any of the ingredients in the product.

Ingredients
Hyaluronate, sulfobetaine, poloxamine, boric acid, borate salt, disodium edetate, and sodium chloride; preserved with polyaminopropyl biguanide 0.00013% and polyquaternium 0.0001%

Warnings
Problems with contact lenses and lens care products can lead to eye infections and/or damage to the cornea and even loss of vision.
It is essential that you carefully follow the instructions for the care of your lenses and lens products provided by your contact lens specialist and on the product and lens case leaflets.
Eye conditions, including keratitis, can develop rapidly and may lead to loss of vision.
Daily wear contact lenses (worn only during the day) are not suitable for overnight wear and should not be worn while sleeping.
Contact lens wearers are advised to visit their contact lens specialist at least twice a year.
Every time you store your lenses in the lens case, you must fill it with fresh lens solution; never top off the solution or reuse the old solution.
You must discard the old solution immediately after removing your lenses from the lens case.
You should never treat your lenses with water or store them in a lens case that has been rinsed with water, whether it is tap water,
bottled water or distilled water or another non-sterile liquid.
Always clean, rinse, and let your lens case dry in the air when you remove your lenses from the case.
Allow the lens case to dry upside down in the air so that excess solution can drain away.
Regularly replace your lens case.
If you fail to discard the solution from the lens case after each use or use water to care for your lenses, this may lead to eye infections and possibly loss of vision.
See the included leaflet for important additional safety instructions.

Side effects
The following problems may occur: stinging eyes, burning or itching sensation (irritation), discomfort after inserting the lens, the feeling that something is in the eye (a foreign object or damage), excessive tearing, unusual eye discharge, redness in the eyes, decreased sharpness of vision (poor visual acuity), blurred vision, seeing colors or halos around objects, sensitivity to light (photosensitivity), or dry eyes.
If you experience any of the above symptoms: remove your lenses immediately.
• When the discomfort or problem resolves, examine the lens carefully.
• If the lens is damaged, do not use it anymore. Place the lens in the lens holder and contact your contact lens specialist.
• If the lens is dirty, or if there is an eyelash or something else on it, or if the problem resolves and the lens appears undamaged, clean and disinfect the lens and reinsert it into the eye.
• If the problem persists, remove the lens immediately and consult your contact lens specialist.
If any of the above symptoms occur, there may be a serious condition, including an infection, keratitis, neovascularization (blood vessel growth), or iritis (inflammation).
Consult a specialist immediately to determine the type of condition and to have it treated to prevent further damage to the eye.

Storage advice
Dispose of the solution in the lens holder after each use.
Keep the bottle tightly closed when not in use.
Store at room temperature.
Adhere to the expiration date as stated on the packaging and the bottle.
Dispose of the remaining lens solution 90 days after opening.
Keep out of reach of children

Additional information
Medical device. Read the instructions for use before use.

Manufacturer / Distributor
OTC Medical BV, Rijksweg-West 2, 6842 BD Arnhem