HG Mold Cleaner Foam Spray

HG Mold Remover Foam Spray
Biocide 14738N

HG mold remover foam spray directly and easily destroys all molds, causing the dirty black spots to disappear. Mold, moisture, or weather stains are common in silicone joints between the bathtub and tile wall, in the shower cabin, and in plasterwork. This foam spray variant has a unique foam formula, allowing the foam to adhere longer and providing better and longer action. Additionally, the product has a less penetrating odor, targets the mold even better, and reduces the chance of splashing.
HG mold remover foam spray directly and easily destroys all molds, causing the dirty black spots to disappear.

Legal Usage Instructions
Use is only permitted as a means to combat molds (black deposits) in damp places. The instructions for use must be followed. The product is intended solely for non-professional use.

Use biocides safely. Read the label and product information before use.

Composition
Sodium hypochlorite 4.2% (AS ACTIVE CHLORINE).

Dosage/Usage
If you have used the bottle before, there may be residues of the liquid left in the spray opening, which could affect its performance upon reuse. Therefore, we advise you to thoroughly rinse the spray opening with hot tap water before reuse, for example, through the vent holes on
the side of the foam nozzle. The product has a bleaching effect; if in doubt, test first on an inconspicuous area. Do not remove mold beforehand. Press the nozzle on the front and turn a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn dirt, spray again after 30 minutes and let it act for another 30 minutes. Clean the sprayed surface with water and a sponge. Wash elastic joints (e.g., silicone sealant) after about 30 minutes and spray again. After use, turn the nozzle back a quarter turn (lock position). For cleaning large surfaces with green deposits, we recommend HG "green deposit cleaner".
Coverage: 2-3 m2 wall surface, 6-8 m2 tile joints

Warnings
It is advised to ventilate well during use and to wear rubber/plastic gloves. Avoid splashes on clothing; (high) gloss paint and slats. In case of contact, rinse immediately with water. Avoid contact with metals such as prints on decorative strips, aluminum, and stainless steel. Do not treat colored surfaces. We advise against using this product on (spray) plaster ceilings.
After use, slight permanent brown discoloration may sometimes occur on light elastic joints (e.g., silicone sealant). Brown discoloration may occur on poorly glazed tiles and old tiles with hairline cracks. This brown color can potentially be removed with Hypo (sodium thiosulfate). The bottle must not be reused. Transport and store in a cool, dark place, upright. Shelf life: See
bottom of the bottle. If stored at 20° C in the dark. Longer shelf life at lower temperatures.