HG Mold Moisture Stain Cleaner

HG Mold Moisture Stain Remover
Biocide 9793N

HG mold, moisture & stain remover
HG mold, moisture & stain remover immediately destroys mold in damp places, indoors and outdoors. For cleaning tiled walls (also suitable for marble) and joints in bathrooms, showers, toilets, kitchens, basements, cellars, saunas, swimming pools, garages, sheds. Also cleans facades, balconies, plant boxes, garden statues, etc. HG mold, moisture & stain remover bleaches gray and black moldy areas.

Legal usage instructions
Only allowed for use as a means of combating fungi (black deposits) in damp places. The instructions for use must be followed. The product is intended solely for non-professional use.

Use biocides safely. Read the label and product information before use.

Composition
Active substance and content: Sodium hypochlorite 49g/liter (as active chlorine) Contains anionic surfactants: <5%

Dosage/use
Remove the lock before use. The product has a bleaching effect; if in doubt, test first in an inconspicuous place. Do not remove mold beforehand. Press the nozzle on the front and turn a quarter turn. Spray the surface from a distance of 3-5 cm. For stubborn stains, re-spray after 30 minutes and let it act for another 30 minutes. Clean the sprayed surface with water and a sponge.

Wash elastic joints (e.g., silicone sealant) after about 30 minutes and re-spray. After use, turn the nozzle back a quarter turn (lock position).
Coverage: 2-3m2 wall surface, 6-8m2 tile joints.

Particular hazards
H315- Causes skin irritation.
H319- Causes serious eye irritation.
H400- Very toxic to aquatic life.
EUH206- Warning! Do not use in combination with other products. Dangerous gases (chlorine) may be released.
P101- When seeking advice, keep the container or label available. P102- Keep out of reach of children.
P264- Wash hands thoroughly after handling this product.
P273- Avoid release to the environment.
P305+P351+P338- IN CASE OF CONTACT WITH EYES: rinse cautiously with water for
a few minutes; remove contact lenses, if possible; continue rinsing.
P337+P313- If eye irritation persists: consult a physician.

Safety recommendations
Transport and store cool, dark, and upright.

Warnings
It is advised to ventilate well during use and to wear rubber/plastic gloves. Prevent splashes on clothing, painted surfaces, plastic shower trays, and slats. Rinse immediately with water in case of contact. 
Avoid contact with metals such as prints on decorative strips, aluminum, and stainless steel. Do not treat colored surfaces. We advise against using this product on ceilings. After use, some permanent brown discoloration may occur on light elastic joints (e.g., silicone sealant). Brown staining may develop on poorly glazed tiles and old tiles with hairline cracks. This brown color can potentially be removed with Hypo (sodium thiosulfate), available upon request from the HG consumer service department. The bottle must not be reused.