HG Natural Stone Top Layer Repair

HG Natural Stone Top Layer Repair
HG natural stone top layer repair restores damage caused by etching, light wear, and acids from soft drinks and wine on the top layer of marble and all other calcareous natural stone types. This product is particularly suitable for smaller surfaces such as countertops, tabletops, and window sills, but can also be excellently used for repairing local etching spots or light damage on floors. 250 ml is sufficient for approximately 15m².

Use
Follow the steps below for correct use of HG natural stone top layer repair.

1. The surface must be completely clean, grease and dust-free. Therefore, clean beforehand with HG natural stone cleaner extra strong (product 40) and let it dry completely.
2. Wear protective gloves and apply the liquid thinly using a dry, clean cloth.
3. Then rub it out with a steel wool sponge. Keep rubbing until the surface is completely dry and a nice, clear shine is achieved.
4. Treat the surface to be treated without interruptions. Therefore, do not treat more than 40 cm2 at a time.
5. Repeat this treatment 1 to 2 times, depending on the desired shine. Then wipe the surface well with a dry cloth.

Warnings
Transport and store the bottle upright.
This product is not suitable for non-calcareous surfaces and surfaces with a coating.
Remove spilled product immediately, otherwise etching spots will occur.
Never leave used "pads" or sponges on the treated surface.

WARNING H302 - Harmful if swallowed.
Contains: magnesium hexafluorosilicate EINECS: 241-022-2

Manufacturer / Distributor
HG International B.V., P.J. Oudweg 41, 1314 CJ Almere