Microlife Non-contact thermometer NC200

Microlife Non-contact thermometer NC200

This Microlife thermometer is a high-quality product that incorporates the latest technology and has been tested according to international standards. With its unique technology, this thermometer can provide a stable reading free from heat interference with each measurement. Each time the thermometer is turned on, the device automatically performs a self-test to ensure the accuracy of the measurements.

This thermometer has been clinically tested, found to be safe and accurate when used in accordance
with its user manual.

Technical specifications
Type: Custom mode non-contact thermometer NC 200
Mode type: Adjustable mode
Measurement site: Forehead
Reference to body site: Under the tongue
Measurement range: Body mode: 34.0 - 43.0 °C / 93.2 - 109.4 °F
Object mode: 0.1 - 99.9 °C / 32.2 - 211.8 °F
Resolution: 0.1 °C / °F
Storage conditions: -25 - +55 °C / -13 - +131 °F
15 - 95 % maximum relative humidity
Automatic shut-off: Approximately 1 minute after the last measurement.
Battery: 2 x 1.5V alkaline batteries; type AAA
Battery life: approximately 2000 measurements (with new batteries)
Dimensions: 156.7 x 43 x 47 mm
Weight: 91.5 g (with battery), 68.5 g (without battery)
IP Class: IP22
Reference to
standards: ISO 80601-2-56; IEC 60601-1; IEC 60601-1-2 (EMC)
Expected lifespan: 5 years or 12000 measurements
Measurement in just a few seconds
The innovative infrared technology makes it possible to complete a measurement without contact with the body. This guarantees
a safe and hygienic measurement within seconds.
Automatic measurement with distance control
This device can automatically take a measurement when the
desired distance within 5 cm is reached.
Multiple applications (large measuring range)
This thermometer has a large measuring range of 0.1 - 99.9 °C /
32.2 - 211.8 °F; the thermometer can be used to
to measure body temperature, but can also be used
for measuring the surface temperature of:
Milk in a baby's bottle
The water in a baby's bath
The ambient temperature

Accurate and reliable
The unique probe tip with built-in advanced infrared sensor ensures that each measurement is accurate and reliable.

User-friendly and simple to use
The ergonomic design makes the thermometer handy and easy to use.
This thermometer can even be used on a sleeping child, who can continue to sleep peacefully.
This thermometer is quick and therefore pleasant to use for children
Read multiple measurements
Users can consult the last 30 measurements by activating the memory mode. This allows you to easily
Tracking temperature variations.

Safe and hygienic
- No direct contact with the skin.
- No risk of broken glass or swallowing mercury.
- Completely safe for children.

Fever alarm
- 10 short beeps and a red illuminated LCD alert you that a temperature above 37.5 °C has been measured.
- Tracking system for self-measurement
- A green light on the back side shows the user if the correct distance has been reached and a measurement is automatically taken.

What this product is used for
The Microlife thermometer is intended to measure and monitor human body temperature.

Instructions for use
Taking temperature with this thermometer
The thermometer measures the infrared radiation emitted by the forehead or other objects. This energy is captured by the lens and converted into a temperature value.

Control screen and symbols
All symbols appear 9: Press the START/IO button to activate the thermometer, all symbols will appear on the screen for 1 second.
Ready for measurement AT: When the thermometer is ready for the measurement, the symbol «°C» or «°F» will continue to blink, while the body or object symbol is continuously displayed.
Countdown for measurement BR: A 3-second countdown is shown on the display (3, 2, 1) before each measurement.
Measurement completed AK: The measurement will be displayed on display 4 while both the ear or forehead symbol and the symbol for «°C» or «°F» are continuously displayed.
As soon as the symbol «°C» or «°F» starts blinking again, the device is ready for the next measurement.
Low battery level AN: When the thermometer is turned on, the icon continues to blink to remind you that the batteries need to be replaced.

Setting date, time, and beeper functions
Date and time setting
After the batteries are inserted, the year blinks on the display BO. You can set the year by pressing the M button 5. To confirm and then set the month to
to set, press the MODE button 6.
Now you can set the month with the M button 5. Press the MODE button 6 to confirm and then set the day.
Follow the instructions as described above to set the day, hours, and minutes.
Once you have set the minutes and press the START/IO button 7, the date and time are set and the time will be displayed.
If no button is pressed for 20 seconds, the thermometer will automatically switch to the ready for use mode AT.
End time setup: Press the START/IO button 7 during time setup. The LCD screen will display the Date/time symbol with "--:--". Then press the START/IO button 7 to start the measurement. If you do nothing further, the thermometer will automatically
turn off.
Change current date and time: Hold the MODE button 6 for 8 seconds until the year starts blinking BO. You can now enter the new data as described above.

Beeper setting
Hold the MODE button 6 for 3 seconds to set the beeper BP.
Press the M button 5 to turn the beeper on or off. The beeper is activated when the sound symbol BP is displayed without a cross.
When the beeper setting is selected, press the START/IO button 7 for the "ready for measurement" mode; otherwise, the device will automatically be ready for measurement after 10 seconds.

Switching from body mode to object mode
Press the START/IO button 7. All symbols will appear on the screen 4 for 1 second.
The standard mode is the object mode AL. Press the MODE button 6 to switch from mode AM. To switch back to body mode, press the MODE button again.

Instructions for use
Always remove the protective cap BS before use.
Measuring in body mode with automatic measurement and distance control
1. Press the START/IO button 7. All symbols will appear on the screen 4 for 1 second.
2. A blinking «°C»/«°F» symbol, a blue blinking trace light 2, and a beep signal indicate that the device is ready for a measurement AT.
3. Remove hair, sweat, or dirt from the forehead to avoid inaccurate measurements.
4. Aim the thermometer at the center of the forehead and maintain a distance of no more than 5 cm from the forehead.
5. The device will automatically start when the measurement sensor 1 detects the required distance of less than 5 cm. The display will show a countdown (3, 2, 1); after 3 seconds, a long beep will indicate that the measurement is complete.
6. Self-measurement: The self-measurement light 3 will help indicate when the measurement starts. Keep the thermometer aimed at the forehead until the light turns off.
7. Read the measured temperature from the LCD display.
8. For a subsequent measurement, keep the thermometer away from the forehead and wait until the «°C»/«°F» symbol starts blinking again. Continue with the above steps 4 - 5.
9. Press and hold the START/IO button 7 for 3 seconds to turn it off; otherwise, the device will automatically turn off after 60 seconds.
Measuring in object mode without automatic measurement 1. Press the START/IO button 7. All symbols will appear on the screen 4 for 1 second.
2. Press the MODE button 6 to switch to object mode.
3. A blinking «°C»/«°F» symbol, a blue blinking trace light 2, and a beep signal indicate that the device is ready for a measurement AT.
4. Aim the thermometer at the center of the object you want to measure from a distance of no more than 5 cm. Now press the START/IO button 7. After 3 seconds, a long beep will indicate that the measurement is complete.
5. Read the measured temperature from the LCD display.
6. For a subsequent measurement, wait until the «°C»/«°F» symbol starts blinking again. Continue with the above steps 4 - 5.
7. Press and hold the START/IO button 7 for 3 seconds to turn it off; otherwise, the device will automatically turn off after 60 seconds.
Patients and thermometer must stay in a room with a constant temperature for at least 30 minutes.
Do not measure during or immediately after feeding a baby.
Do not use the thermometer in areas with excessively high humidity.
Patients should not drink, eat, or exercise prior to/during measurement.
Do not remove the measuring device from the measuring area before you have heard the final beep.
10 short beeps and a red illuminated LCD alert you that a temperature above 37.5 °C has been measured.
Always take the temperature at the same location, as temperature readings can vary from place to place.
differences.
Doctors recommend measuring the temperature rectally for the first 6 months in newborns, as other measurement methods can often lead to unreliable results. If you still want to perform a non-contact measurement on newborns, please verify this with a rectal measurement.
In the following circumstances, it is recommended to take three measurements and take the highest result:
Children under three years old with a deficient immune system for whom having a fever is critical.
If the user is learning to use the thermometer for the first time, until he/she is familiar with the device and obtains regular results.
If the measurement is unexpectedly low.
Temperature measurements should not be compared with each other, as body temperature can
fluctuating due to time and ambient temperature, often the body temperature is highest in the evening and lowest in the morning hours.

Normal body temperatures are:
Axillary: 34.7 - 37.3 °C / 94.5 - 99.1 °F
Oral: 35.5 - 37.5 °C / 95.9 - 99.5 °F
Rectal: 36.6 - 38.0 °C / 97.9 - 100.4 °F
Microlife NC 200: 35.4 - 37.4 °C / 95.7 - 99.3 °F

Switchable from Celsius to Fahrenheit
This thermometer displays the temperature measurement in Fahrenheit and Celsius. To switch between °C and °F, press and hold the MODE button 6 for 3 seconds; the beeper symbol will be shown on the display. Press the MODE button again; the current measurement unit ("°C" or "°F" symbol) will be displayed in display AO. Switch between the measurement unit (°C/°F) by pressing the M button 5. Once the measurement unit is selected, press the START/IO button 7 to activate "ready to measure"; otherwise, the device will automatically turn off after 10 seconds AT.

9. Calling up 30 measurements in memory mode
This thermometer displays the last 30 measurements, including date and time.
Call mode AP: Press the M button 5 to enter call mode when the device is off. The memory symbol “M” is blinking.
Result 1 – the last result AQ: Press the M button 5
and release it to see the last result. Screen 1
only with memory symbol.
By pressing and releasing the M button 5 after the last 30 results have been called up, the above sequence will continue from result 1.

10.Error messages
Measured temperature too high AR: The symbol “H” will
appear when the temperature is higher than 43 °C / 109.4 °F in
body mode or 99.9 °C / 211.8 °F in object mode.
Measured temperature too low AS: The symbol “L” will
appear when the temperature is lower than 34 °C / 93.2 °F in the
body mode or 0.1 °C / 32.2 °F in object mode.

Ambient temperature too high BT: The symbol “AH” will appear when the ambient temperature is higher than
40.0 °C / 104.0 °F.
Ambient temperature too low BK: The symbol “AL” will appear when the ambient temperature is below 15.0
°C / 59.0 °F in body mode or lower than 5.0 °C / 41.0 °F in object mode.

Error in operation BL:
“The system is not working well.”
“There 2”: The device is placed directly on the forehead or object. Maintain a distance of 1 - 5 cm. Never touch the underside (sensor area) of the measuring sensor.
Empty screen BM: Please check if the batteries are installed correctly. Also, check the polarity (<+> and <->) of the batteries.
Empty battery status BN: If only the icon is displayed on the screen, you should replace the batteries immediately.

11. Cleaning and Disinfecting
Use a cotton swab or a cotton ball soaked in alcohol (70% isopropyl) to clean the thermometer housing and the probe tip. Ensure that no liquid enters the inside of the thermometer. Never use aggressive cleaning agents, thinners, or benzene for cleaning, and never submerge the thermometer in water or any other liquid. Make sure that no scratches occur on the surface of the probe lens and the display.

12. Battery Replacement
This instrument comes with 2 long-life 1.5V AAA batteries, which should be replaced immediately when only the BN symbol is displayed.
Remove the battery cover BQ by pushing in the direction shown.
Replace the batteries – check the correct polarity as indicated by the symbols in the compartment.
Batteries and electronic instruments must be disposed of according to local regulations, not with household waste.

See the leaflet for button mentions and location.

Components
-

Warnings
Follow the instructions for correct use. This documentation provides you with important operating and safety instructions regarding this device. Read the documentation carefully before using the device and keep it for future reference.

This device is intended for the purpose described in the user manual only. The manufacturer cannot be held liable for damage caused by improper use.

Never immerse this device in water or other liquids. For cleaning, follow the instructions in the "Cleaning and Disinfecting" section.

Do not use the device if you suspect it is damaged or if you notice anything unusual during use.

Never open the device

A normal biological process called vasoconstriction can occur in the early stages of fever, resulting in a lower skin surface temperature; the measured temperature with a thermometer may then be suspiciously low.

If the measurement result is not consistent with the patient's findings or is suspiciously low, repeat the measurement every 15 minutes or verify the result with another core body temperature measurement.

This device contains sensitive components and must be handled with care. Follow the storage and operating instructions as described in the "Technical specifications" chapter!

Allow children to use the device only under adult supervision; small parts may be swallowed.

Do not use the device close to strong electromagnetic fields such as mobile phones or radio installations. Maintain a distance of at least 3.3 meters from such devices when using this device.

Protect it from:
- extreme temperatures
- shocks and drops
- pollution and dust
- direct sunlight
- heat and cold
- When the device will not be used for an extended period
must be removed when the batteries are to be replaced

WARNING: The measured results with this device do not constitute a diagnosis. It does not replace a consultation.
from a doctor, especially not when the symptoms do not match. Do not rely solely on the measurement result; always consider other symptoms as well as the feedback from the patient. In case of doubt, always contact your doctor.

Additional information
Medical device. Read the instructions for use before use.

Manufacturer / Distributor
Microlife AG Swiss Corporation, Espenstrasse 139, 9443 Widnau, Switzerland